Internet And Network Settings - Pitney Bowes SendPro P Series User Manual

Entering the USPS® Mailer ID
Setting the mailer ID number:
1. Select Settings under Mailing.
2. Select Applications.
3. Select Tracking Services.
4. Enter the Mailer ID number in the Mailer ID field.
If the Mailer ID has been added or changed and you already had pre-existing jobs created using ERR,
you will need to manually edit the Mailer ID in those jobs. The global Mailer ID set in the above steps
will not override pre-existing jobs.
Editing the Mailer ID on a pre-existing job:
1. Select Jobs.
2. Select the job containing ERR that you want to edit. The Run Mail screen will open with your
selected job.
3. Edit the Mailer ID field on the left side of the screen.
4. Select Save.

Internet and network settings

The Internet and Network settings allow you to:
View the IntelliLink® connection parameters for your postage account.
l
Reset the factory settings (if necessary).
l
View and export the communications settings. Once exported, the communication setting
l
information is used to set up the SendSuite Xpress™ or Ascent™ interface.
View the inserter communications settings.
l
Initiate Remote Assistance when instructed by a Pitney Bowes service representative.
l
Perform a network connectivity test to ensure your SendPro P system can connect successfully
l
to the Pitney Bowes infrastructure.
To access these options, select the Settings button in the Mailing tile on the Home screen and then
select Internet & Network.
Pitney Bowes User Guide April 2022
System Setup
178