Using The Rates And Updates Scheduler - Pitney Bowes Connect+ Series Operator's Manual

Rates and updates

Using the rates and updates scheduler

Your Connect+® Series / SendPro® P-Series system can be set up to check for and download rates and
software updates automatically at a specific time each day. The Rates and Updates button in the Mailing
tile on the Home screen will show an exclamation mark when updates become available.
Note:
You must install the rates and software updates once they are downloaded.
Turning the scheduler on for the first time
To turn the scheduler on:
Note:
Once you turn the update scheduler on it cannot be turned off.
1. Select Set up Scheduler when prompted, or select Rates and Updates on the Home screen
and then select Updates Scheduler.
2. Type in the time of day you want the system to check for rates and updates.
3. Select Done to return to the Home screen.
Changing the scheduler settings
1. Select Rates and Updates on the Home screen and then select Updates Scheduler.
2. Follow steps 2-3, above, to change the scheduler settings.
Pitney Bowes Operator Guide February, 2018 Page 213 of 349