Si39-303
3. Remote Controller and Changeover Switch: Name
and Function of Each Switch and Display
RXYQ series
REYQ series
1. On/off button
2. Operation lamp (red)
3. Display "
4. Display "
Operation Manual
Remote Controller and Changeover Switch: Name and Function of Each Switch and Display
Press the button and the system will start. Press the button again and the system will stop.
The lamp lights up during operation.
" (changeover under control)
It is impossible to changeover heat/cool with the remote controller when this icon is
displayed.
" (air flow flap)
Refer to the chapter "Operation procedure - Adjusting the air flow direction".
203