Power Connector; Ir Sensor Board - HP ENVY 17 Maintenance And Service Manual

Power connector

Table 5-14 Power connector description and part number
Description
Power connector
Before removing the power connector cable, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the USB cable (see
To remove the power connector cable:
1. Remove the cable (1) from the clips in the computer (2).
2. Remove the power connector and cable from the computer (3).
Reverse this procedure to install the power connector cable.

IR sensor board

Description
IR sensor board
IR sensor board cable
Before removing the IR sensor board, follow these steps:
58 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page 32).
USB board on page 41) to learn how to remove the USB cable
Spare part number
L87959-001
29).
30).
Spare part number
L87964-001
L87953-001