Solid-State Drive And Optane Memory Module - HP ENVY 17 Maintenance And Service Manual

Solid-state drive and Optane Memory Module

Table 5-5 Solid-state drive descriptions and part numbers
Description
512 GB, PCIe, Gen 3 × 4
512 GB, PCIe, value
256 GB, PCIe, Gen 3 × 4
256 GB, PCIe
128 GB, SATA-3, TLC
32 GB/512 GB, PCIe (Optane Memory Module/solid-state drive combination drive)
16 GB PCle (Optane Memory Module/solid-state drive combination drive)
1TB M2 2280 PCIe-NVMe Value
1TB M2 2280 PCIe-NVMe 3 × 4 TLC SS
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
To remove the solid-state drive:
Remove the Phillips M2.0 × 3.0 screw (1), lift the solid-state drive module bracket (2), and then pull the
▲
solid-state drive module from the socket (3).
Reverse this procedure to install the solid-state drive.
(Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page 32).
Spare part number
L85360-001
L85364-001
L85350-001
L85354-001
L85346-001
L85366-001
L85372-001
L85370-001
L85348-001
29).
30).
Component replacement procedures 37