Bottom cover and rubber feet
Table 5-1
Bottom cover and rubber feet descriptions and part numbers
Description
Bottom cover in natural silver finish
Bottom cover in nightfall black finish
Rubber foot kit for natural silver finish
Rubber foot kit for nightfall black finish
Prepare the computer for disassembly
▲
To remove the bottom cover and rubber feet:
1.
Peel the two rubber feet off the bottom of the computer (1).
2.
Remove the seven Phillips M2.5 × 8.5 screws from under the rubber feet (2).
3.
Remove the two M2.0 × 3.0 screws from each side of the computer (3).
4.
Use a plastic tool (1) to separate the front of the bottom cover from the computer.
30
Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Spare part number
L87948-001
L87949-001
L87974-001
L87975-001
29).