Toshiba TECRA M2 User Manual page 44

Touch pad control
buttons
Touch pad
AccuPoint control
buttons
AccuPoint
TOSHIBA
Presentation button
TOSHIBA Console
button
TECRA M2
Control buttons below the Touch Pad let you
select menu items or manipulate text and
graphics designated by the on-screen pointer.
A Touch pad located in the center of the palm rest
is used to control the on-screen pointer. Refer to
the Using the Touch pad section in Chapter 4,
Operating Basics.
Control buttons below the keyboard let you select
menu items or manipulate text and graphics
designated by the on-screen pointer.
A pointer control device located in the center of
the keyboard is used to control the on-screen
pointer. Refer to the Using the AccuPoint section
in Chapter 4, Operating Basics.
Press this button to change internal display,
simultaneous display, or multi-monitor display.
The default setting is the simultaneous display on
LCD and CRT with resolution of 1024 X 768. When
you press this button twice, the display mode
returns to single display on LCD only. Setting of
multi-monitor display in Windows XP, PC changes
its display mode to the multi-monitor display on
LCD and CRT. You can also return to single
display by pressing this button twice.
The setting of TOSHIBA Presentation button can
be changed through the property of TOSHIBA
Console. Display mode is changed to the multi-
monitor display by selecting "Different Image"
(Windows XP only) or to the simultaneous display
on internal and external display by selecting
"Same Image".
Press this button to launch an application
automatically.
The default is TOSHIBA Console.
The Grand Tour
2-9