Toshiba TECRA M2 User Manual page 24

DVD±R/±RW drive
(DVD Dual drive)
Display
The computer's LCD panel supports high-resolution video graphics. The
screen can be set at a wide range of viewing angles for maximum comfort
and readability.
Built-in
Graphics controller
Keyboard
Built-in
TECRA M2
Some models are equipped with a full- size
DVD±R/±RW drive module that lets you record
data to rewritable CD/DVDs as well as run either
12cm (4.72") or 8cm (3.15") CD/DVDs without
using an adaptor. It reads DVD-ROMs at
maximum 8 speed and CD-ROMs at maximum 24
speed. It writes CD-R at up to 16 speed, CD-RW
at up to 10 speed, DVD-R and DVD-RW at
maximum 2 speed. DVD+R and DVD+RW at
maximum 2.4 speed. This drive supports the
same formats as the DVD-ROM drive.
■
DVD-ROM
■
DVD-R
■
DVD+R
■
CD-DA
■
Photo CD™ (single/multi-session)
■
CD-ROM Mode 1, Mode 2
■
CD-ROM XA Mode 2 (Form1, Form2)
■
Enhanced CD (CD-EXTRA)
■
CD-G (Audio CD only)
■
Addressing Method 2
14.1" TFT screen, 16 M colors, with one of the
following resolutions:
■
XGA, 1024 horizontal x 768 vertical pixels
■
SXGA+, 1400 horizontal x 1050 vertical pixels
Graphics controller maximizes display
performance. Refer to Appendix C for more
information.
85 keys or 86 keys, compatible with IBM
enhanced keyboard, embedded numeric overlay,
dedicated cursor control,
Chapter 5, The Keyboard, for details.
Introduction
■
DVD-Video
■
DVD-RW
■
DVD+RW
■
CD-Text
and keys. See
1-6