Removing the keybord brace, removing two screws and rotate the keyboard
Use a point size 0 Phillips screwdriver.
8. Lift up the back of the keyboard, rotate it toward you and lay in face
down on the palm rest.
■
When you move the keyboard forward, do not touch the keys. Doing so
could cause misalignment. Hold the keyboard by the sides and lay it
gently on the palm rest.
■
The keyboard is connected to the computer by a ribbon cable. Be careful
not to apply tension to this cable when you lift up the keyboard. Do not
try to disconnect this cable.
9. One screw of Metal brace which is pressing down the keyboard cable
is removed. Metal brace is removed.
TECRA M2
Rotate the keyboard
Removing the metal brace
Optional Devices
8-8