Toshiba TECRA M2 User Manual page 30

Heat dispersal
Hibernation
Standby
TECRA M2
To protect from overheating, the CPU has an
internal temperature sensor. If the computer's
internal temperature rises to a certain level, the
cooling fan is turned on or the processing speed
is lowered. Use the Fan item of the Basic Setup
tab in TOSHIBA Power Saver.
■
Maximum
Performance
■
Performance
■
Battery
optimized
This feature lets you turn off the power without
exiting from your software. The contents of main
memory are saved to the hard disk, when you turn
on the power again, you can continue working
right where you left off. Refer to the Turning off the
power section in Chapter 3, Getting Started, for
details.
If you have to interrupt your work, you can turn off
the power without exiting from your software.
Data is maintained in the computer's main
memory. When you turn on the power again, you
can continue working right where you left off.
Introduction
Turns on fan first, then if
necessary lowers CPU
processing speed.
Uses a combination of fan
and lowering the CPU
processing speed.
Lowers the CPU processing
speed first, then if necessary
turns on the fan.
1-12