Device Config - Toshiba TECRA M2 User Manual

Setup
This field displays BIOS Version and date.

Device Config

Device Configuration
This option lets you set the device configuration.
All Devices
Setup by OS
Parallel/Printer
Some models are equipped with Parallel/Printer tab. This tab lets you set
the Parallel Port Mode. Use the Windows Device Manager to make settings
for the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP
Standard
Bi-directional
Display
This tab lets you customize your computer's display settings for either the
internal LCD screen or for an external monitor.
Power On Display
Lets you use the display to be used when the computer is booted. (This
setting is only available on Standard VGA mode and not available on
Windows Desktop)
Auto-Selected
LCD + Analog RGB
TECRA M2
BIOS sets all devices.
Operating system sets devices that it can control.
(Default)
Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set to
ECP. (Default)
This setting should be used with some other
parallel devices.
Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD. (Default)
Selects both the internal LCD and external
monitor for simultaneous display.
HW Setup
7-2