Table of Contents
Advertisement
Removing the Seats
1. Remove the 8 socket-head bolts that secure the seat
rails of the seat to the chassis and remove the seats
(Figure
9).
1. Socket-head bolts
2. Seat rail
2. Repeat step
1
for the other seat
4
Removing the Coolant Tank
(non-HD models), ROPS
Shield, and Seat Shroud (HD
and HDX series models)
No Parts Required
Removing the CVT Cooling Duct and
Coolant Tank
1. For HDX-Auto Workman models, remove the CVT
cooling duct as follows:
A. Remove the hose clamp that secures the CVT
cooling duct to the flange of the CVT intake at
the back of the ROPS panel on the passenger side
(Figure
10).
Figure 9
3. Seat
(Figure
9).
1. CVT intake
2. Hose clamp
B. Remove the CVT cooling duct from the flange of
the CVT intake
2. For non-HD models, lift the coolant tank up and out
of the support bracket on the back of the ROPS shield
(Figure
11).
1. Coolant tank
2. Coolant-tank bracket
3. Set the coolant tank upright onto the engine/chassis.
7
Figure 10
3. CVT cooling duct
(Figure
10).
Figure 11
3. Support bracket
Advertisement
Table of Contents
