Table of Contents
Advertisement
Figure 6
1. Brake lever
2. Knob (hydraulic-lift lever)
3. Knob (speed-range lever)
4. Knob ( transmission lever)
3. Move the hydraulic-lift lever to the raise the bed
position, and set the hydraulic-lift lock
Figure
6).
4. Remove the remaining knobs from console levers by
rotating the knobs counterclockwise
5. For Workman models with an automatic transmission
remove the shift indicator as follow:
A. Remove the 4 hex-head screws that secure the
shift-indicator cover to the seat shroud
Figure 7
Workman models with an Automatic Transmission
1. Indicator connector
2. Shift-indicator cover
3. Hex-head screws
5. Transmission lever (L
position)
6. Hydraulic-lift lock (locked
position—left)
7. Speed-range lever (A
position)
(Figure 5
and
(Figure
6).
(Figure
4. Control cover
5. Machine-harness
connector
B. Lift shift indicator assembly up, disconnect
electrical connectors of the machine harness and
indicator, and remove the indicator from the
machine.
6. Remove the 6 hex-head screws that secure the control
cover to the seat shroud, and remove the control cover
(Figure 7
and
Workman models with a Manual Transmission
1. Screw
7).
6
(Figure
7).
Figure
8).
Figure 8
2. Cover plate
Advertisement
Table of Contents
