Toro 110-2626 Installation Instructions Manual page 13

Install the Manifold Bracket (HDX-Auto
Workman models)
1. Remove the 2 flanged-head bolts that secure the right
differential support to the housing of the differential
(Figure 26).
Note: Retain the bolts.
Figure 26
1. Differential support
(right—old)
2. Axle support
3. Flanged locknut
2. Remove the 2 flanged-head bolts and 2 flanged lock
nuts that secure the right differential support to the
axle support (Figure
Note: Retain the bolts and nuts; discard the old
differential support.
3. Align the holes in the new right differential support
with the threaded holes in the differential
4. Differential
5. Flanged-head bolt
26).
(Figure
1. Axle support
2. Flanged locknut
3. Differential support
(right—new)
4. Secure the differential support to the differential with
the 2 flanged-head bolts that you removed in step
(Figure 27).
5. Align the holes in the right differential support to the
holes in the axle support
6. Secure the differential support to the axle support
with the 2 flanged-head bolts and 2 flanged lock nuts
(Figure 27) that you removed in step 2.
27).
13
Figure 27
4. Differential
5. Flanged-head bolt
(Figure 27).
1