Security Log Details Screen; Figure 40 - Security Log Screen - York YD Series Operation Manual

SECTION 2 – OPTIVIEW CONTROL CENTER
Overview
This screen allows the user to view the details of a
logged setpoint change, selected from the list on the
Security Log Screen. The date and time the setpoint
was changed, the new and old setpoint value and ac-
cess level and user ID used to make the change are
displayed. The data on this screen can be printed.
Requires a login access level of SER-
VICE.
Display Only
Description
Displays the setpoint/category that was changed.
Time
Displays the time the setpoint was changed.
Date
Displays the date the setpoint was changed.
Access Level
Displays the Login Access Level used to make the
setpoint change.

FIGURE 40 - SECURITY LOG SCREEN

104

SECURITY LOG DETAILS SCREEN

User ID
Displays the login User ID used to make the setpoint
change.
Old Value
Displays the previous setpoint value.
New Value
Displays the value entered at the time of the setpoint
change.
Programmable
Print
Generates a report of change parameters displayed on
this screen.
Navigation
Home
Access Level Required: SERVICE
Causes an instant return to the Home Screen
Security Log
Access Level Required: SERVICE
Causes an instant return to the Security Log Screen.
FORM 160.69-O1
ISSUE DATE: 9/30/2012
00663VIPC
JOHNSON CONTROLS