RadO UnNhBT FunctOn - Icom IC-F9020 Series Operating Manual

3
APCO P25 MODE OPERATION
n Radio Uninhibit function
D Transmitting
A Rado Unnhbt functon allows you to send a sgnal that
wll revve the nhbted transcever.
[Digital Button] key assgnment s necessary to transmt the
rado unnhbt sgnal.
Not avalable on Non-dsplay types n the Conventonal
mode.
✔ For Trunking mode operation:
Ths functon s avalable only for a dspatcher n the Trunkng
mode.
q Push [Digital Button] to enter the dgtal call type selec-
ton mode.
w Push [CH Up] or [CH Down], or rotate [CH Up/Down] to
select "RDO UINHIBIT."
For Handheld types:
RDO UNINHIBIT
DSEL PAGE
23
For Mobile types:
R D O U I N H I B I T
STAT
e Push [Digital Button] agan to enter the Indvdual ID se-
lecton mode.
• A pre-programmed ID name s dsplayed.
• When the ID name s not programmed, the ID code s dsplayed.
For Handheld types:
RDO UNINHIBIT
INDIVIDUAL1
DSEL PAGE STAT
r Push [CH Up] or [CH Down], or rotate [CH Up/Down] to
select the desred ID (or name).
• Push and hold [Digital Button] for 1 sec. to cancel and return to
normal operaton.
• The ID can be edted wth the 10-keypad*. (Dependng on the
pre-settng.) See p. 16 for edtng detals.
* 10-key types only.
t Push [PTT] to transmt the rado unnhbt sgnal to the tar-
get staton.
• The Busy/Transmt ndcator (for Handhelds) or Transmt ndca-
tor (for Mobles) lghts red.
• "PLEASE WAIT" s dsplayed.
y Release [PTT].
• "ACK RECEIVED" s dsplayed after recevng an acknowledge-
ment from the target staton, and then the transcever returns to
normal operaton.
• "NO ACKNOWLDG" s dsplayed when an acknowledgement s
not receved, and then transcever returns to normal operaton.
For Mobile types:
R D O U I N H I B I T
I N D I V I D U A L 1