Icom IC-F9020 Series Operating Manual page 35

y Push [CH Up] or [CH Down], or rotate [CH Up/Down] to
select the desred ID (or name).
• Push and hold [Digital Button] (or [Digital Message]) for 1 sec.
to cancel and return to normal operaton.
• The ID can be edted wth the 10-keypad*. (Dependng on the
pre-settng.) See p. 16 for edtng detals.
* 10-key types only.
u Push [PTT] to transmt the Short Message to the target
staton.
• The Busy/Transmt ndcator (for Handhelds) or Transmt ndca-
tor (for Mobles) lghts red.
• "PLEASE WAIT" s dsplayed.
i Release [PTT].
• "ACK RECEIVED" s dsplayed after recevng an acknowledge-
ment from the target staton, and then the transcever returns to
normal operaton.
• "NO ACKNOWLDG" s dsplayed when an acknowledgement s
not receved, and then transcever returns to normal operaton.
APCO P25 MODE OPERATION
D Receiving
Not avalable on Non-dsplay types.
q When a Short Message s receved;
• The Busy/Transmt ndcator (for Handhelds) or Busy ndcator
(for Mobles) lghts green.
• The rnger sounds. (Dependng on the pre-settng.)
• The callng staton ID name (or code) and the Short Message
blnk.
• " " blnks. (for Mobles)
For Handheld types:
The received message
HELLO
INDIVIDUAL1
DSEL PAGE STAT
The calling station ID name
w An acknowledgement s automatcally transmtted.
• The Busy/Transmt ndcator (for Handhelds) or Transmt ndca-
tor (for Mobles) lghts red.
e Push any key (except for [
blnkng and return to normal operaton.
For Mobile types:
H E L L O
I N D I V I D U A L 1
]) to stop the dsplay from
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
32