STe Select FunctOn (P25 TrunkNg Mode Only); IndVDual Call - Icom IC-F9020 Series Operating Manual

3
APCO P25 MODE OPERATION
n Site Select function
(P25 Trunking mode only)
The RFSS and SITE IDs can be edted manually wth
[Site Select].
Not avalable on Non-dsplay types.
To edit the RFSS and SITE IDs:
q Push [Site Select] to select "SITE 1."
w Push [Site Select] agan to dsplay the ste nformaton
(RFSS ID and SITE ID).
• Push [Site Select] to return to normal operaton.
e Push and hold [Site Select] for 1 sec. to enter the RFSS
ID edt mode.
r Push [CH Up]/[CH Down] or rotate [CH Up/Down] to edt
the ID.
t After edtng, push [Site Select] to store the RFSS ID, and
enter the SITE ID edt mode.
y Repeat step r to edt.
u Push and hold [Site Select] for 1 sec. to return to "SITE 1"
ndcaton as n step q.
i Push and hold [Site Select] for 1 sec. to store the SITE ID,
and return to normal operaton.
15
For P25 Trunking mode operation:
The transcever should be regstered and group affilated
wth the control channel before the followng operatons
can be performed.
n Individual call
D Transmitting
Indvdual call allows you to make a call to a specfic staton,
and t provdes prvate communcaton.
[Individual] key assgnment s necessary to transmt the In-
dvdual call.
Not avalable on Non-dsplay types.
q Push [Individual] to enter the Indvdual ID selecton
mode.
INDV
• "INDV" nverts to " ." (on Handhelds)
• The key ndcator appears above the key to whch [Individual] s
assgned. (on Mobles)
• A pre-programmed ID name s dsplayed.
• When the ID name s not programmed, the ID code s dsplayed.
• Push agan to cancel and return to normal operaton.
For Handheld types:
INDIVIDUAL1
INDV INDV TGID SET
For Mobile types:
I N D I V I D U A L 1