Required Tools; Ibm 6868 System Slot And Memory Locations; Figure 4-1 Ibm 6868 System Slot Locations - IBM IntelliStation M Pro 6868-5BU System Integration Manual

4-2

Required Tools

IBM 6868 System Slot and Memory Locations

Rear
Microprocessor 1
Microprocessor 2
Memory connectors
(AGP) Slot
PCI Slot 1
CD-ROM
PCI Slot 2
audio
connector
PCI Slot 3
Internal
PCI Slot 4
speaker
connector PCI Slot 5
Installing Memory, the Avid Board Set, and the Fan Kit
You require some or all of the following tools to install boards or
memory in the IBM 6868 system:
• A regular flat-blade screwdriver
• Antistatic protection
• A 3/16-inch nutdriver, optional, but it saves time
The IBM 6868 system has six slots; one AGP slot and five PCI slots.
Figure 4-1 shows the slot locations of the IBM 6868 system as viewed
with the left side of the system off. The memory connectors are above
the AGP slot. Other connectors and sections of the system board are
shown as a reference.
Figure 4-1 IBM 6868 System Slot Locations
Front
System board
Floppy cable connector
Secondary IDE cable connector
Primary IDE cable connector (not used)