2.5
Concurrency
The UEPO cables are concurrently maintainable. The UEPO bypass switches located on the BPCHs need to be placed in
bypass as described in the following procedure.
2.6
UEPO Cable Weight
The UEPO Cable weighs approximately 498.95 grams / 1.1 lbs
2.7
Required SSRs and Roles
This service procedure requires one SSR.
2.8
Estimated Service Time
This procedure normally takes approximately 30 minutes.
2.9
P7IH Hand Tool Kit P/N 74Y0988 Required Tools
3 SERVICE PROCEDURE
STOP – Do not proceed unless you have read "Safety_Notices_G229-9054.pdf" which is
available from InfoCenter; see Section 1.2.
3.1
Customer System Administrator
The Customer System Administrator should be made aware of this service activity, but they don't normally
have specific steps to perform.
Power775 UEPO Cable Service Procedure
PN: 41U8503, EC N44172
12 of 32