IBM IntelliStation M Pro 6868-5BU System Integration Manual page 95

Verifying the 3D DVE Effects Driver
Verify that the 3D DVE effects device driver started (if applicable) by
looking at the Genie status. Use the following procedure to check the
status of the driver:
1. Open the Control Panel and double-click the Devices icon.
2. Use the scroll bar to find the Genie driver and click to select it.
3. Check the Status column for a device status of Started. This
indicates that the driver installed and initialized properly. Check
the Startup column for a startup type of System.
4. Click the Close button.
Verifying the Sentinel Driver
Verify that the Sentinel device driver started by opening the Devices
Control Panel and looking at the Sentinel status. Use the following
procedure to check the status of the driver:
1. Open the Control Panel and double-click the Devices icon.
2. Use the scroll bar to find the Sentinel driver and click to select it.
3. Check the Status column for a device status of Started. This
indicates that the driver installed and initialized properly. Check
the Startup column for a startup type of Automatic.
4. Click the Close button.
7-11
Verifying Software Installation