Table of Contents
Advertisement
c
Revision Changes
•
Chapter 4, "Installing Memory, the Avid Board Set, and the Fan
Kit," explains how you install memory, the Avid board set, and the
fan kit in the system.
•
Chapter 5, "Connecting the Remaining Avid Devices," explains
how you connect the remaining Avid devices to the system before
you install the Avid application software.
•
Chapter 6, "Changing System BIOS and Creating Windows NT
Image," explains what you need to do to make the proper changes
to the BIOS and to create a Windows NT image on the system disk.
•
Chapter 7, "Installing and Verifying Avid System Software,"
explains how you install and verify the Avid software.
•
Chapter 8, "Troubleshooting," provides examples and solutions of
possible problems you might see during the integration of the
system.
•
Appendix A, "Regulatory and Safety Notices," provides
regulatory and safety notices for the system.
Do not use this guide to integrate another vendor platform. While
much of the content is applicable to other platforms, there are
specific steps that are not relevant to other systems.
The following table lists the changes made to this guide for each
revision.
Revision
Changes
a
B
Change from using the Meridien III board set to
using the Meridien II board set.
a. Date of Revision B changes is December of the year 2000.
1-3
Revision Changes
Advertisement
Table of Contents
Troubleshooting
