Connecting The Meridien I/O Box - IBM IntelliStation M Pro 6868-5BU System Integration Manual

Connecting the Meridien I/O Box

&
The Meridien I/O box is a standalone box that contains the audio and
video I/O boards. You connect video equipment to the Meridien I/O
box and audio equipment to the audio I/O device. The Meridien I/O
box is connected to the PC by a 9.8-foot (3-meter) digital data cable.
To connect the Meridien I/O box to the IBM 6868 system:
1. Locate the 9.8-foot (3-meter) digital data cable in the hardware kit.
2. Connect one end of the digital data cable to the Meridien I/O box
at the system interface connector shown in Figure 5-2.
AUDIO IN
MIC CHAN 1 or 3
Y
R-Y
S-VIDEO
COMPOSITE
REF
Figure 5-2 Meridien I/O Box to System Cable Connection
3. Connect the other end of the digital data cable to the connector
labeled M (main) on the digital media board set (see Figure 5-3).
onnection to Meridien I/O box
Connection C not used
Figure 5-3 Digital Media Board Set to Meridien I/O Box Cable
Connection
AUDIO OUT
-10
+4
CHAN 2 or 4 IN
CHAN 1 or 3 CHAN 2 or 4
IN OUT 1 OUT 2
B-Y Y R-Y B-Y
DIGITAL VIDEO
SYSTEM
IN / OUT
OUT 1 OUT 3 S-VIDEO
OUT 2
Connecting the Meridien I/O Box
AES / EBU
S / PDIF
OUT IN OUT
OUT 3
LTC
SLAVE CLOCK
IN OUT
OUT
System interface connector
5-3