J3
Figure 4-7
Orient the over-the-top connector as shown in Figure 4-8, and then
carefully seat the over-the-top connector into the daughter board and
Genie connectors.
Figure 4-8
n
You can also connect the over-the-top connector to the Genie 3D effects board
and the Meridien II digital media board set while the boards are out of the
system, and then carefully place the connected boards into the system at the
same time.
Over-the-Top Connector
Connecting the Over-the-Top Connector
4-15
J2
J1
Installing the Avid Board Set