Sanitizing / Cleaning The Puncture Mechanism; Sanitizing/Cleaning The B3000 Inlet Needle And Gasket - Keurig B3000 Service Manual

6. Sanitizing / Cleaning the Puncture Mechanism (P.M.)
A
C
A. Sanitizing/Cleaning the B3000 Inlet Needle and Gasket
1. DEPRESS NEEDLE
PLATFORM TO EXPOSE
INLET NEEDLE AND THE
INLET NEEDLE GASKET.
LOOK FOR TEARS OR
OTHER NON FUNCTIONING
CONDITIONS.
FOR PROPER SANITIZING / CLEANING OF
THE PUNCTURE MECHANISM, THE
FOLLOWING ITEMS ARE RECOMMENDED.
A. DISHWASHING LIQUID SOLUTION OR
SOAP & WATER IN A SPRAY BOTTLE.
B. MINI SCRUB BRUSH FOR CRAMPED AND
TIGHT AREAS [i.e. AS SHOWN, McMASTER-
CARR PT NO. 7243T22].
C. CLOTH FOR WIPING.
B
D. ACCESS TO A SINK (IDEALLY WITH FRUIT
SPRAYER) OR A BUCKET OF WATER FOR
RINSING. SEE IMAGES 18 AND 19.
2. WHILE DEPRESSING
THE PLATFORM
REMOVE STUBBORN
PARTICLES BY USING
BRUSH AND WATER.
B3000 SERVICE MANUAL
60-200807-000, REV C
3. WIPE THE NEEDLE AND
GASKET AREA CLEAN
USING A DRY CLOTH.
PERFORM THREE
CLEANSING BREWS
(BREWS WITHOUT K-
CUPS) TO RINSE OUT
NEEDLE.
64