Keurig B3000 Service Manual page 63

5. Power off the brewer and drain both hot and cold water tanks.
6. Reconnect the brewer to the filtered cold water supply and follow the PRIME procedure to
refill the brewer.
7. Once the prime process is complete, power off the brewer and drain both hot and cold water
tanks again.
8. Power up the brewer and follow the PRIME procedure again, performing several (10)
cleansing brews to remove any residual taste from the citric acid.
NOTE: If the LCD screen still alerts you to perform a de-scale after completing the procedure,
repeat the de-scaling procedure.
B3000 SERVICE MANUAL
60-200807-000, REV C 63