Keurig B3000 Service Manual page 25

14. The next screen will look like this (hot water dispense). You can disable the plain Hot Water
button by pressing the "Adjust" button.
15. The next screen will look like this (select cup sizes). You can select which cup sizes you want
the brewer to dispense. You can disable up to 3 cup sizes. One cup size has to be on.
16. The next screen will look like this (error code). The last error condition that the brewer detected
will be display in this menu. See the ERROR CODE chart on page 41 for code definitions
17. The next screen will look like this (was brewer drained). Press "NO" or "YES" accordingly.
This is the last MENU for the Menu Mode.
NOTE: YOU MUST SCROLL THROUGH THE MENU MODE COMPLETELY. FAILURE TO
DO SO WILL NOT SAVE ANY CHANGES THAT HAVE BEEN MADE.
B3000 SERVICE MANUAL
60-200807-000, REV C 25