Setting The Time Program For The Dhw Circulation Pump - Viessmann Vitotronic 200 Series Operating Instructions For The System User

Time program
(cont.)

Setting the time program for the DHW circulation pump

The time program for the DHW circulation pump is pre-
set to Automatic mode at the factory. In other words,
the DHW circulation pump operates in parallel to the
DHW heating time program.
Extended menu:
1.
2. "DHW"
Switching off DHW heating
You do not want to heat DHW or provide central
heating
For the preferred heating circuit
Standard menu
1. / for the "Standby mode" operating program (frost
protection is active).
2. OK to confirm.
For all heating circuits
Extended menu
1.
2. "Heating"
3. If necessary, / for the required heating circuit.
4. "Heating program"
5. "Standby mode" (frost protection active)
3. "DHW circ time prog"
4. Set the required time phases.
To see how to set a time program, see page 17.
Note
Between time phases the DHW circulation pump
remains off.
You do not want to heat DHW, but do want to pro-
vide central heating
—
Extended menu
1.
2. "Heating"
3. If necessary, / for the required heating circuit.
4. "Heating program"
5. "Heating and DHW"
6. until the menu is displayed.
7. "DHW"
8. "Set DHW temperature"
9. Set 10 °C.
DHW heating
29