Setting The Time Program Efficiently - Viessmann Vitotronic 200 Series Operating Instructions For The System User

Operation
Time program
(cont.)

Setting the time program efficiently

If you would like to set a different time program for just
one day of the week, proceed as follows:
Deleting time phases
■ Set the time for the end point to the same time that
was set for the start point.
Or
For the start point, select a time prior to 00:00 h.
■
The display shows the selected time phase as
"- - : - -".
18
Example: You want to set a different time program for
Monday:
1. Select the period "Monday–Sunday" and set the
time program.
Heating time program
Monday-Sunday
Monday-Friday
Saturday-Sunday
Monday
Select with
Fig. 11
Note
The tick is always set at the sections of the week
with identical time phases.
Factory setting: Same for all days of the week,
therefore "Monday-Sunday" is ticked.
2. Then select "Monday" and adjust the time program
for that day.
Note
The "Saturday-Sunday" part of the week is ticked
because the set time phases correspond only to this
part of the week.
Heating time program
Monday-Sunday
Monday-Friday
Saturday-Sunday
Monday
Select with
Fig. 12
HC1
ê
ç
ê
ê
(
HC1
ê
ê
ê
ç
(