Table of Contents
Advertisement
Standard menu
(cont.)
Note
■
Settings for the preferred heating circuit can also be
adjusted in the extended menu (see page 13).
The settings for any other connected heating circuits
■
can only be adjusted in the extended menu.
■
Your heating contractor can block the operation of
the standard menu. In such cases, you will not be
able to make adjustments in either the standard
menu or in the extended menu.
Setting the standard room temperature for the pre-
ferred heating circuit
Press the following keys:
/
for the required value.
OK to confirm.
Extended menu
In the extended menu, all settings for the Vitotronic
control unit's range of functions can be called up and
adjusted, including for example adjustments to the hol-
iday program and time programs.
You can find the menu overview on page 43.
Call up the extended menu as follows:
If the screensaver is active (see page 14):
■
Press OK and then
■
From anywhere in the menu:
Press
.
Menu
Heating
DHW
Solar energy
Test mode
E
Continue with
Fig. 6
Dialogue line
E
How to use the controls
The screen saver will become active if you have not
adjusted any settings on the programming unit for a
few minutes. The display brightness is reduced.
.
OK
Setting the operating program for the preferred
heating circuit
Press the following keys:
/
for the required operating program.
OK to confirm.
Note
Your heating contractor can block operation for the
extended menu. In this case, you can only call up
service and fault messages.
Operation
13
Hide quick links:
Advertisement
Table of Contents
