Terminology - Viessmann Vitotronic 200 Series Operating Instructions For The System User

Appendix
Calling up options under "Information"
"Date"
"Radio clock signal"
Heating circuit 1 (HC1)
"Heating program"
"External hook-up"
■
"Holiday program"
■
"External program"
■
"Party mode"
■
"Economy mode"
■
"Heating and DHW"
■
"Only DHW"
■
"Standby mode"
■
"Operating status"
"Standard heating mode"
■
"Reduced mode"
■
"Standby mode"
■
"Time program"
"Set room temp"
"Room temperature"
"Set red. room temp"
"Set ext. room temp"
"Set party temp"
"Slope"
"Level"
"Heating circ pump"
"Holiday program"
Heating circuit 2, 3 (HC2, HC3)
"Heating program"
"Screed drying"
■
"External hook-up"
■
"Holiday program"
■
"External program"
■
"Party mode"
■
"Economy mode"
■
"Heating and DHW"
■
"Only DHW"
■
"Standby mode"
■
"Operating status"
"Standard heating mode"
■
"Reduced mode"
■
"Standby mode"
■

Terminology

Operating program
The operating program determines whether you heat
your rooms and DHW, or only heat DHW, or whether
you switch off central heating (with frost protection
monitoring).
44
(cont.)
"Time program"
"Set room temp"
"Room temperature"
"Set red. room temp"
"Set ext. room temp"
"Set party temp"
"Slope"
"Level"
"Heating circ pump"
"Mixer"
"Flow temperature"
"Holiday program"
DHW
"DHW time prog"
"DHW circ time prog"
"DHW temperature"
"Cylinder prim pump"
"DHW circ pump"
Solar
"Collector temp"
"Solar DHW"
"Solar circuit pump" (hours run)
"Solar energy history"
"Solar energy"
"Solar circuit pump" (ON/OFF)
Or
"Solar circ pump speed"
"Heating suppr. DHW"
"SM1 output 22" (ON/OFF)
"SM1 output 22" (hours run)
"Sensor 7"
"Sensor 10"
"Heat suppr. heating"
Operating status
In the operating program "Heating and DHW", the
operating status changes from "Standard heating
mode" to "Reduced heating mode" and vice versa. The
times for the operating status changeover are defined
by you when setting the time program.