Programming Unit - Viessmann Vitotronic 200 Series Operating Instructions For The System User

Opening the control unit
Vitotronic 200, type KW6B
Fig. 3
Top part of control unit with programming unit
A
Pushbutton for changing the angle
B

Programming unit

You can change any settings on your heating system
centrally at the programming unit of the control unit.
If remote control units are installed in your rooms, you
can also adjust the settings at the remote control units.
21°C
14°C
Fig. 4
Takes you to the previous step in the menu or
cancels a setting that has been started.
Cursor keys
To scroll in the menu or to set values.
OK Confirms your selection or saves the setting.
Two control levels are available:
■ The standard menu: See page 12.
■ The extended menu: See page 13.
(cont.)
BA
Note
You will find a short operating guide in the "Technical
documentation".
Remote control operating instructions
Calls up "Help" (see following chapter) or addi-
tional information on the selected menu.
Calls up the extended menu.
Note
The screensaver is activated if you have not made
any adjustments on the programming unit for a few
minutes (see page 14).
Operation
11