Setting The Preferred Heating Circuit For The Standard Menu - Viessmann Vitotronic 200 Series Operating Instructions For The System User

Entering names for the heating circuits
The menu shows "Apartment" for "Heating circuit 2".
Apartment
Party mode
Economy mode
Set room temperature
Set reduced room temp
Select with
Fig. 25

Setting the preferred heating circuit for the standard menu

If your heating system has several heating circuits,
you can select the heating circuit to be displayed in the
standard menu.
Setting the time and date
The time and date are factory-set. If your heating sys-
tem has been shut down for a prolonged period, you
may need to reset the time and date.
Extended menu
1.
2. "Settings"
Language selection
1. Extended menu:
2. "Settings"
Setting the temperature unit (°C/°F)
Factory setting: °C
(cont.)
HC2
Ù
Ú
22°C
ß
(
Extended menu
1.
2. "Settings"
3. "Standard menu"
4. Select the heating circuit:
3. "Time / Date"
4. Set the time and date.
3. "Language"
4. Select the required language.
1. Extended menu:
■ "Heating circuit 1" (for heating circuit 1)
"HC1" is displayed
■ "Heating circuit 2" (for heating circuit 2)
"HC2" is displayed
■ "Heating circuit 3" (for heating circuit 3)
"HC3" is displayed
Further adjustments
31