Receiving - YASKAWA PROFIBUS-DP 1000 Series Technical Manual

Hide thumbs Also See for PROFIBUS-DP 1000 Series:
Table of Contents

Advertisement

3

Receiving

Please perform the following tasks upon receiving the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the option nameplate
(Refer to
Figure 1
on page 8).
• Contact your supplier if you have received the wrong model or the option does not function properly.
Contents and Packaging
Description:
-
Quantity:
Tools Required for Installation
• A Phillips screwdriver (M3 metric / #1, #2 U.S. standard size) is required to install the option.
• A pair of diagonal cutting pliers.
• A small file or medium-grit sandpaper.
Note: Tools required to prepare option cables for wiring are not listed in this manual.
YASKAWA ELECTRIC SIEP C730600 42B 1000-Series Option SI-P3 Technical Manual
Table 2 Contents of Package
Option
Ground Wire
1
1
Screws (M3)
LED Label
ERR
BF
3
3 Receiving
Installation Manual
MANUAL
RUN
COMM
1
1
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Profibus-dp a1000 seriesProfibus-dp si-p3

Table of Contents