Receiving - YASKAWA PROFINET 1000 Series Technical Manual

3

Receiving

Please perform the following tasks upon receipt of the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the name plate of the option package.
• Contact your supplier if you have received the wrong model or the option does not function properly.
Option Package Components
Description:
_
Quantity:
Tools Required for Installation
• A Phillips screwdriver (M3 metric/#1, #2 U.S. standard size*) is required to install the option and remove drive front
covers.
• Diagonal cutting pliers. (required for some drive models)
• A small file or medium grit sandpaper. (required for some drive models)
*Screw sizes vary by drive capacity. Select a screwdriver appropriate for the drive capacity.
Note:
Tools required to prepare option networking cables for wiring are not listed in this manual.
YASKAWA SIEP YEACOM 07A 1000-Series Option PROFINET SI-EP3 Technical Manual
Ground
Option
Wire
1 1
Screws (M3) LED Label
NS
3
3 Receiving
Installation Manual
MANUAL
MS
1 1
7