Receiving - YASKAWA SI-EM3 Installation Manual

3

Receiving

After receiving the option package:
1. Make sure that the option is not damaged and no parts are missing. Contact your sales
outlet if the option or other parts appear damaged.
NOTICE: Do not use damaged parts to connect the drive and the option. Failure to comply could damage
the drive and option.
2. Confirm that the model number on the option nameplate and the model listed in the
purchase order are the same. Refer to
distributor where the option was purchased or contact Yaskawa or a Yaskawa
representative about any problems with the option.
u
Option Package Contents
Description: Option
_
Quantity:
<1> GA700 and GA800 drives do not use the ground wire.
<2> GA700 and GA800 drives use two screws only.
u
Installation Tools
• A Phillips screwdriver. Phillips screw sizes vary by drive capacity.
• A flat-blade screwdriver (blade depth: 0.4 mm (0.02 in), width: 2.5 mm (0.1 in)).
• A pair of diagonal cutting pliers.
• A small file or medium-grit sandpaper.
YASKAWA ELECTRIC TOBP C730600 91D YASKAWA AC Drive Option SI-EM3 Installation Manual
Table 2 Option Package Contents
Ground Screws
Wire (M3)
<1>
1 1
3
Figure 2 on page
LED Labels
A1000,
D1000,
R1000,
U1000,
U1000L, and
Z1000U
NS MS
1
<2>
3 Receiving
14 for details. Contact the
GA500,
Z1000 GA700,
and GA800
MS
NS
1 1
Installation
Manual
MANUAL
1
13