Completing The Upgrade - Nortel Meridian 1 Hardware Replacement Manual

Page 120 of 250
Nortel Meridian - 1 Software/Database/PEROM CDROM INSTALL Tool (x11)
— — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — —
You have selected to Quit the Software Installation Tool
You may reboot the system or return to the Main Menu.
Before rebooting the system, remove Install diskette from the floppy drive.
----------------------------------------------
DO NOT REBOOT USING BUTTON!!
----------------------------------------------
Please enter:
<a> - Reboot the system.
<m> - Return to the Main menu.
<CR>-->
Enter Choice > a

Completing the upgrade

553-3001-520 Standard 17.00 January 2002
Replacing equipment
28 Select <a> to reboot the system.
The system will automatically perform a sysload and system initialization
during which several messages will appear on the system terminal. Wait until
initialization has finished (INI messages are no longer displayed on the system
terminal) before continuing.
29 Verify that the "DONE" message appears on the system terminal.
Note: The SYSTEM INI message may take 70 seconds or more to
appear.
To complete the IODU/C card upgrade, verify CPU and CNI status.
1 Log into the system.
2 Verify CPU and CNI functionality:
LD 135
STAT CPU
STAT CNI
****
to load the overlay
to check the CPU status
to verify CNI functionality
to exit the program
553-7752