Nortel Meridian 1 Hardware Replacement Manual page 9

Accessing the system
Content list
Reference list
The following are the topics in this section:
Reference list . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Access through the system terminal . . . . . . . . . . . . . . . . . . . . . . . . . . .
Access through the maintenance telephone . . . . . . . . . . . . . . . . . . . . .
The following are the references in this section:
• Administration (553-3001-311)
• System Management Applications (553-3001-301)
When you replace equipment, you often send commands to the system
software in order to disable faulty equipment and to enable and test newly
installed equipment.
You send maintenance commands to the system through the system terminal
or the maintenance telephone. This section gives the procedures for accessing
the system through these devices.
Note: The Multi User Login feature, available with software Release 19
and later, allows more than one device to interact with the Meridian 1.
Refer to System Management Applications (553-3001-301) for details on
using this feature.
Page 9 of 250
Hardware Replacement
9
10
11