Nortel Meridian 1 Hardware Replacement Manual page 100

Page 100 of 250
Nortel Meridian - 1 Software/Database/PEROM CDROM INSTALL Tool (x11)
— — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — —
You have chosen to Upgrade IOP-ROM in card slot xx from
the context: x11xxxx to the context: x11xxxx.
This will replace old IOP-ROM with the ROM image files:
"/p/os/ioprom".
You may Continue with ROM upgrade or Quit now and leave ROM
unchanged.
Please enter:
<CR>-->
<a> - Continue with ROM Upgrade.
<q> - Quit.
Enter choice > a
553-3001-520 Standard 17.00 January 2002
Replacing equipment
34 Select <a> to continue with the IOP-ROM upgrade
35 Select <q> to quit and reload the system.
36 Select <y> to confirm quit.
37 Remove the diskette from the floppy drive.
38 Select <a> to reboot the system.
The system will automatically perform a sysload and system initialization
during which several messages will appear on the system terminal. Wait until
initialization has finished (INI messages are no longer displayed on the system
terminal) before continuing.
39 Verify that the "DONE" message appears on the system terminal.
Note: The SYSTEM INI message may take 70 seconds or more to
appear.
553-7787