Nortel Meridian 1 Hardware Replacement Manual page 85

Nortel Meridian - 1 Software/Database/PEROM CDROM INSTALL Tool (x11)
— — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — —
You have chosen to Upgrade IOP-ROM in card slot xx from
the context: x11xxxx to the context: x11xxxx.
This will replace old IOP-ROM with the ROM image files:
"/p/os/ioprom".
You may Continue with ROM upgrade or Quit now and leave ROM
unchanged.
Please enter:
<CR>-->
<a> - Continue with ROM Upgrade.
<q> - Quit.
Enter choice > a
24 Select <a> to continue with the IOP-ROM upgrade.
25 When the Status Summary appears, press <CR> to continue.
26 When the Install Menu appears, select <d> to install the database.
27 Select <d> to copy the database from the redundant disk.
28 Select <y> to continue installation.
29 Select <a> to continue database copy.
30 When the Install Menu appears, select <q> to quit the system.
31 Select <y> to confirm quit
32 Remove the diskette from the floppy drive.
33 Select <a> to reboot the system.
The system will reboot. Wait for the "INI" and "DONE" messages to display
before continuing. It will take at least 70 seconds between the "DONE" and
"INI" messages.
Replacing equipment
553-7787
Hardware Replacement
Page 85 of 250