Nortel Meridian 1 Hardware Replacement Manual page 53

Installing equipment
1
2
3
4
5
6
7
8
Nortel Meridian - 1 Software/Database/PEROM CDROM INSTALL Tool (x11)
— — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — —
The Software Installation Tool will install or upgrade Meridian-1
System Software, Database and the PE-ROM (both CP and IOP ROM).
You will be prompted throughout the installation and given the
opportunity to quit at any time.
Please enter:
<u> - To Install menu.
<CR>-->
<t> - To Tools menu.
<q> - Quit.
Enter choice > u
c. Release the MAN RST button.
The system is now in split mode where each Core is functioning
independently and the automatic switchover has been disabled.
Set the NORM/MAINT switch to MAINT on the replacement card.
Insert the Install Program diskette which corresponds with the NT5D10
Call Processor.
Remove the current CP card and put it in a static bag and box.
Insert the CP replacement card into its vacated slot and hook the
locking devices.
Press the MAN RST button on the replacement CP card.
When the NT Logo Screen appears on the terminal, press <CR>.
Enter the date and time.
When the Main Menu appears, select <u> to go to the Install Menu.
M A I N M E N U
Replacing equipment
553-7780
Hardware Replacement
Page 53 of 250