MAS Requirements
1
Release Note:
Should features of the integration not
function optimally when integrated to a PBX
or MM that may be operating on an
unsupported software release as defined
Section 2.0 and 3.1, customers will need to
upgrade their PBX and/or MM to a
supported software release.
PBX hardware requirements
PBX software requirements
AVAYA E1/QSIG
2.0 AVAYA MESSAGE APPLICATION SERVER REQUIREMENTS
•
Dialogic D/600JCT-1E1 or D/300JCT-E1
•
CT Bus cable (only required for multiple card installation)
•
Software Releases
3.0 PBX HARDWARE REQUIREMENTS
•
DS1 card # xxx . One per each Dialogic E1 Interface Card
•
Cables:
-RJ45 on the Dialogic (cable depends on PBX connection)
3.1 PBX SOFTWARE REQUIREMENTS
• Minimum Software
Important: Before ordering account teams should check with Avaya
Services to determine if there are any applicable patches for customer
specific configuration
•
ISDN PRI
•
Private Networking
•
Basic Call Setup
•
Basic Supplementary Services
•
Supplementary Services with Rerouting
The above information is provided by AVAYA Inc. as a guide. See disclaimer on page 1
1
: 3.x, 4.0, 5.x
1
: I55
2