Advertisement
AVAYA E1/QSIG
-
Interruption of service on a QSIG link. 15 minutes after service
is re-established on the QSIG link, a message waiting interrogation
request is sent to the MAS.
-
Scheduled daily maintenance routine. Once daily, during the
scheduled maintenance period (usually around 1:00 A.M. on most
switches), a message waiting interrogation request is sent to the
MAS.
8.6
MAS can support multiple Avaya/Tenovis PBX's in a "centralized"
voice mail arrangement only if all PBX's are connected using QSIG. If
Avaya G3/MultiVantage PBX's uses DCS for networking, QSIG
integration cannot provide full functionality to remote PBX subscribers.
Please refer to Section 9.0 to support a centralized environment using
DCS+.
When running MWI on your Voice Server you should setup a separate
trunk group containing 2channels from one of your QSIG trunks, these
channels should not be apart of any other trunk group. You should then
create a new MWI port group containing these channels and make the
relevant changes in MAS VMCS.
8.7
Support for Transfer to QSIG Voice Mail feature. In order to
provide support for the Transfer to QSIG Voice Mail feature on your
QSIG integrated MAS solution, you need to ensure the following
criteria are met:
Your switch will need to be running Definity software R8 or later.
1. You will need to have the following features enabled on your switch:
5. A Feature Access code for Transfer to QSIG Voice Mail, will need to be
6. Your MAS Voice Server will need to be using the QSIG-MWI hunt group
Example on how the feature works:
Extension 7001 has voice mail but calls received are forwarded to
extension 7002 rather than directly to voice mail.
Callers to 7001 are answered at 7002 but the caller wishes to leave a
voice mail for the person at 7001.
The person at 7002 transfer the caller directly to the voice mail for 7001
by pressing the transfer button, then the code for transfer to voice mail
(*8,*50, etc.), then presses transfer again.
The above information is provided by AVAYA Inc. as a guide. See disclaimer on page 1
2. ISDN-PRI or ISDN-BRI
3. QSIG Supplementary Services
4. Transfer to QSIG Voice Mail
configured.
integration as described in this document.
21
Advertisement
