Advertisement
NOTE: The MWI port within
the MWI Port Group it's used
by the MWI sub-system to
control concurrent MWI
requests. This does not
affect incoming/outgoing
traffic to the port in anyway.
AVAYA E1/QSIG
Next access the Port Groups tab under the MAS name
Click Add Group button
Name Group MWI
Within the new MWI Port Group uncheck all Ports except the MWI port. This
will be the upper most port of the trunk group. Port 29 on a single board or Port
59 if 2 boards (see side NOTE). This port can receive calls, so ensure it is
programmed for both Incoming and Outgoing under the Port Group Usage
Return to the Port Groups General tab and ensure the Default Group under Port
Groups is configured to meet the customer's need for Incoming and Outgoing
under Port Group Usage.
The above information is provided by AVAYA Inc. as a guide. See disclaimer on page 1
- continued on next page -
16
Advertisement
