Camera Settings - JVC KW-M450BT Instruction Manual

Monitor with receiver
Table of Contents

Advertisement

Settings
Settings
<Key Customize>
You can customize the pop-up short-cut menu
(page 9).
• You can also customize the
(favorite) button.
1
Select the menu to customize.
• To customize the
(favorite) button, touch the
icon under favorite instead.
2
Select an item you want to display in the
selected menu.
Available setting items and sources vary depending
on the other settings and models.
3
Repeat steps 1 and 2 to replace the other
menus.
38
ENGLISH

Camera settings

Display the <Camera> screen.
On the Home screen, touch as follows:
Then, on the <SET-UP> screen, touch [Camera].
<R-CAM Interruption>
• ON (Initial): Displays the picture from the rear view
camera when you shift the gear to the reverse (R)
position.
• OFF: Select this when no camera is connected.
<Parking Guidelines>
• ON (Initial): Displays the parking guidelines.
• OFF: Hides the parking guidelines.
<Guidelines SETUP>*
Adjust the parking guidelines according to the size of
the car, parking space and so on.
When adjusting the parking guidelines, make sure to
use the parking brake to prevent the car from moving.
Touch one of the
marks (1), then adjust the
position of the selected
mark (2).
Make sure that A and B are horizontally parallel, and
that C and D are the same length.
• Touch [Initialise] to set all the marks to the initial
default position. A confirmation message appears.
Touch [Yes].
* Selectable only when <Parking Guidelines> is set to [ON].

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kw-m450btm

Table of Contents