Table of Contents
Advertisement
Quick Links
KW-R950BTS
CD RECEIVER
INSTRUCTION MANUAL
RÉCEPTEUR CD
MANUEL D'INSTRUCTIONS
RECEPTOR CON CD
MANUAL DE INSTRUCCIONES
KW-X855BTS / KW-X850BTS
DIGITAL MEDIA RECEIVER
INSTRUCTION MANUAL
RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE
MANUEL D'INSTRUCTIONS
RECEPTOR DE MEDIOS DIGITALES
MANUAL DE INSTRUCCIONES
For customer Use:
Enter below the Model No. and Serial No. which are
located on the top or bottom of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
ENGLISH
FRANÇAIS
ESPAÑOL
B5A-3883-00 [K]
Advertisement
Table of Contents
Related Manuals for JVC KW-X850BTS
Summary of Contents for JVC KW-X850BTS
- Page 1 ENGLISH FRANÇAIS ESPAÑOL KW-R950BTS KW-X855BTS / KW-X850BTS CD RECEIVER DIGITAL MEDIA RECEIVER INSTRUCTION MANUAL INSTRUCTION MANUAL RÉCEPTEUR CD RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE MANUEL D’INSTRUCTIONS MANUEL D’INSTRUCTIONS RECEPTOR CON CD RECEPTOR DE MEDIOS DIGITALES MANUAL DE INSTRUCCIONES MANUAL DE INSTRUCCIONES For customer Use: Enter below the Model No.
- Page 2 útil, deberán ser reciclados en instalaciones que puedan dar el tratamiento Products: DIGITAL MEDIA RECEIVER adecuado a estos productos y a sus subproductos residuales correspondientes. Model Name: KW-X855BTS/KW-X850BTS Póngase en contacto con su administración local para obtener información sobre el Responsible Party: JVCKENWOOD USA CORPORATION punto de recogida más cercano.
- Page 3 SOFTWARE LICENSE AGREEMENT ISED Caution This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is conditions: copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions 1.
- Page 4 Article 4 Right pertaining to the Licensed Software Article 9 Destruction of the Licensed Software Any and all copyrights and other rights pertaining to the Licensed Software and related documents If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or Software, any related documents and copies thereof within two (2) weeks from such date of termination.
- Page 5 Important Notice concerning the Software -CMP The MIT License (MIT) Copyright (c) 2014 Charles Gunyon -jansson Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated Copyright (c) 2009-2012 Petri Lehtinen <petri@digip.org> documentation files (the "Software"), to deal in the Software without restriction, including without Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the...
- Page 6 sha2 Copyright (c) 1995, 1996 Carnegie-Mellon University. All rights reserved. AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/ Author: Chris G. Demetriou Copyright (c) 2000-2001, Aaron D. Gifford Permission to use, copy, modify and distribute this software and its documentation is hereby granted, All rights reserved.
- Page 7 T-Kernel 2.0 This product uses the source code of T-Kernel 2.0 under T-License 2.0 granted by T-Engine Forum (www.tron.org) BSD-3-Clause Copyright (c) 2000-2001, Aaron D. Gifford All rights reserved. You may obtain a copy of the license at https://opensource.org/licenses/BSD-3-Clause THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-
Page 8: Table Of Contents
AUX......................11 SiriusXM® Radio ..................12 How to read this manual JVC Remote Application ............... 16 • The displays and faceplates shown in this manual are examples used to Bluetooth® ....................17 provide clear explanations of the operations. For this reason, they may be different from the actual displays or faceplates. -
Page 9: Before Use
Before Use IMPORTANT • For KW-R950BTS: If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate. • To ensure proper use, please read through this manual before using this •... -
Page 10: Basics
Basics Faceplate KW-R950BTS: KW-X855BTS/KW-X850BTS: Loading slot Display window* Volume knob KW-X855BTS: USB cable from the rear of the unit How to reset * Only for illustration purpose. On the faceplate Turn on the power Press SOURCE B. • Press and hold to turn off the power. -
Page 11: Getting Started
Getting Started Basics Remote control (RM-RK52) (for KW-R950BTS) This unit can be remotely controlled with an optionally purchased remote control. Remote sensor (Do not expose to bright sunlight.) Acknowledge the crossover type and cancel the Pull out the insulation sheet demonstration when using for the first time. -
Page 12: Set The Basic Settings
To set the date For details on how to update the firmware, visit Turn the volume knob to select [DATE SET], then press the knob. <https://www.jvc.net/cs/car/>. Turn the volume knob to make the settings, then press the knob. [FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ;... -
Page 13: Radio
Radio Settings in memory You can store up to 18 stations for FM and 6 stations for AM. Store a station While listening to a station... Press and hold one of the number buttons (1 to 6). (or) Press and hold the volume knob until “PRESET MODE” flashes. Turn the volume knob to select a preset number, then press the knob. -
Page 14: Cd/Usb/Ipod
CD/USB/iPod Radio Default: [XX] Insert a disc (for KW-R950BTS) [TUNER SETTING] Eject disc Label side [SSM] [SSM 01–06]/[SSM 07–12]/[SSM 13–18]: Automatically presets up to 18 stations for FM. “SSM” stops flashing when the first 6 stations are stored. Select [SSM 07–12]/[SSM 13–18] to store the following 12 stations. [IF BAND] [AUTO]: Increases the tuner selectivity to reduce interference noises from adjacent FM stations. - Page 15 • KW-X855BTS: * Do not leave the cable inside the car when not in use. USB FRONT/USB REAR/iPod FRONT/iPod REAR or iPod BT • KW-X850BTS: USB/iPod USB or iPod BT For playable audio file, see “Playable files” on page 35. On the faceplate...
- Page 16 CD/USB/iPod Set the playable source for iPod/iPhone On the faceplate Press 5 B repeatedly. Repeat play You can make the following setting at all sources except at iPod FRONT/ iPod REAR/iPod USB source and iPod BT source. [TRACK REPEAT]/[ALL REPEAT]: Audio CD Press and hold MENU.
-
Page 17: Aux
CD/USB/iPod You can listen to music from a portable audio player via the auxiliary input Quick search (applicable only for CD source and USB FRONT/USB REAR/USB jack. source) If you have many files, you can search through them quickly. Preparation: Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. (Page 6) Press Turn the volume knob to select a folder/list, then press the knob. -
Page 18: Siriusxm® Radio
SiriusXM® Radio Only SiriusXM® brings you more of what you love to listen to, all in one place. Start listening Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite Press SOURCE B repeatedly to select SIRIUS XM. - Page 19 SiriusXM® Radio Settings in memory SiriusXM Replay™ You can store up to 18 channels. While listening to a channel... Store a channel Press the volume knob. “ ” indicator lights up and the unit memorizes this paused position. While listening to a channel... Press the volume knob to start Replay.
- Page 20 SiriusXM® Radio SmartFavorites and TuneStart™ On the faceplate Select a stored Press one of the number buttons (1 to 6). User preset channels are initially assigned as the SmartFavorites channels. SmartFavorite SmartFavorite channel is available with SXV200 or later SiriusXM Vehicle Press channel Tuner.
- Page 21 SiriusXM® Radio TuneScan™ [CODE SET] 1 Turn the volume knob to select a number. 2 Press S / T to move to the entry position. You can get a short preview of the songs that you have missed on each of 3 Repeat step 1 and step 2 to enter a new 4-digit pass code.
-
Page 22: Jvc Remote Application
[YES]: Selects iPhone/iPod touch to use the application via Bluetooth or Preparation: connected via USB input terminal. ; [NO]: Cancels. Install the latest version of JVC Remote application on your device before If [IOS] is selected, select iPod BT source (or iPod FRONT/iPod REAR/iPod USB connecting. -
Page 23: Bluetooth
Search and select the name of your receiver (“KW-R950BTS”/ • Be sure to turn on the Bluetooth function of the device to make the “KW-X855BTS”/“KW-X850BTS”) on the Bluetooth device. following operations. “BT PAIRING” flashes on the display. -
Page 24: Bluetooth - Mobile Phone
Bluetooth® • This unit supports Secure Simple Pairing (SSP). Bluetooth — Mobile phone • Up to five devices can be registered (paired) in total. • Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the unit. To delete the paired device, see [DEVICE DELETE] on page 21. - Page 25 Bluetooth® The following operations may differ or be unavailable depending on the *1 This adjustment will not affect the volume of the other sources. connected phone. *2 Press and hold VOL + to continuously increase the volume to 15. *3 Operations may vary according to the connected Bluetooth device. On the faceplate On the remote control Improve the voice quality...
- Page 26 Bluetooth® Default: [XX] [PHONEBOOK] (Applicable only if the phone supports PBAP.) 1 Press 1 J / 2 K to select the desired letter (A to Z, 0 to 9, and OTHERS). [SETTINGS] • “OTHERS” appears if the first character is other than A to Z, 0 to 9. [AUTO ANSWER] [01 SEC] to [30 SEC]: Answers an incoming call automatically in the selected 2 Turn the volume knob to select a name, then press the knob.
- Page 27 [INFORMATION] [MY BT NAME]: Displays the name of your receiver (“KW-R950BTS”/ Press and hold MENU. “KW-X855BTS”/“KW-X850BTS”). ; Turn the volume knob to select an item (see the following table), then [MY ADDRESS]: Shows address of this unit. press the knob. Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item.
- Page 28 Search and select the name of your receiver (“KW-R950BTS”/ • To cancel, press and hold SOURCE B to turn off the power, then turn on “KW-X855BTS”/“KW-X850BTS”) on the Bluetooth device within the power again. 3 minutes.
-
Page 29: Bluetooth - Audio
Bluetooth® Bluetooth — Audio On the faceplate On the remote control • Operations and display indications may differ according to their availability Press S / T. Press H / I. Reverse skip/ on the connected device. Forward skip • Depending on the connected device, some features may not work with Reverse/Fast- Press and hold S / T. -
Page 30: Amazon Alexa
Tap the name of your receiver (“KW-R950BTS”/“KW-X855BTS”/ • Install the latest version of the Alexa mobile application on your device “KW-X850BTS”) and follow the instructions. (iPhone/iPod touch or Android device), then log in to the application. • Be sure to enable the internet connection on your smartphone. - Page 31 AMAZON ALEXA Communicate with Alexa via the connected microphone. (Page 17) “THINKING...” appears when Alexa is processing your voice input. “SPEAKING...” appears while Alexa is responding to your voice input. “ALEXA” or display information such as playing time, song title, and etc. appears while Alexa is in idle state.
-
Page 32: Audio Settings
Audio Settings AMAZON ALEXA Start listening While in Alexa idle state... Speak the word “Alexa” to the connected microphone (page 17) to activate Alexa. (or) Press on the unit to speak with Alexa. The display shows: “LISTENING...”. Communicate with Alexa via the connected microphone. (Page 17) During music playback in ALEXA source, you can perform the following operations: On the faceplate... - Page 33 Audio Settings Store your own sound settings [EASY EQ] Adjusts your own sound settings. • The settings are stored to [USER] in [PRESET EQ]. Press and hold EQ-BASS to enter [EASY EQ] setting. • The settings made may affect the current settings of [PRO EQ]. Turn the volume knob to select an item, then press the knob.
- Page 34 Audio Settings [AUDIO CONTROL] [VOLUME [LEVEL –15] to [LEVEL +06] ([LEVEL 00]): Presets the initial volume level ADJUST] of each source by comparing to the FM volume levels. (Before adjustment, [BASS BOOST] [LEVEL +01] to [LEVEL +05]: Selects your preferred bass boost level. ; select the source you want to adjust.) [OFF]: Cancels.
- Page 35 Audio Settings Speaker output settings [X ‘ OVER TYPE] Caution: Adjusts the volume before changing the [X ‘ OVER TYPE] to avoid [SPK/PRE OUT] the sudden increase or decrease of the output level. (Applicable only if [X ' OVER TYPE ] is set to [2-WAY]) •...
- Page 36 Audio Settings 2-way crossover setting items Crossover settings Below are the available setting items for 2-way crossover and 3-way [SPEAKER SIZE] crossover. [FRONT] [SIZE] [3.5”]/[4”]/[4.75”]/[5”]/[6.5”]/[6.75”]/[7”]/ CAUTION [4×6]/[5×7]/[6×8]/[6×9]/[7×10] Select a crossover type according to how the speakers are connected. [TWEETER] [SMALL]/[MIDDLE]/[LARGE]/[NONE] (not (Page 42, 43) connected) If you select a wrong type:...
- Page 37 Audio Settings [SUBWOOFER [SW LPF FRQ] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/ [MID RANGE] [HPF FRQ] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/[90HZ]/ LPF]*2 [90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/ [100HZ]/[120HZ]/[150HZ]/[180HZ]/[220HZ]/[250HZ]/ [220HZ]/[250HZ]/[THROUGH] [THROUGH] [SW LPF SLOPE] [–06DB]/[–12DB]/[–18DB]/[–24DB] [HPF SLOPE] [–06DB]/[–12DB] [SW LPF PHASE] [REVERSE] (180°)/ [NORMAL] (0°) [LPF FRQ] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/[6.3KHZ]/ [8KHZ]/[10KHZ]/[12.5KHZ]/[THROUGH] [SW LPF GAIN] [–08DB] to [00DB] [LPF SLOPE] [–06DB]/[–12DB] [PHASE] [REVERSE] (180°)/[NORMAL] (0°)
- Page 38 Audio Settings Digital Time Alignment settings Determining the delay time automatically If you specify the distance from the currently set Digital Time Alignment sets the delay time of the speaker output to create a listening position to every speaker, the delay time more suitable environment for your vehicle.
-
Page 39: Display Settings
Display Settings Zone identification for brightness settings Press and hold MENU. Turn the volume knob to select an item (see the following table), then press the knob. Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. Press MENU to exit. - Page 40 Display Settings [TEXT SCROLL]*2 [SCROLL ONCE]: Scrolls the display information once. ; [COLOR] [SCROLL AUTO]: Repeats scrolling at 5-second intervals. ; [PRESET] Selects illumination colors for the buttons on different zones separately. [SCROLL OFF]: Cancels. 1 Select a zone ([ZONE 1], [ZONE 2], [ALL ZONE]). (See the illustration on [FORMAT]*3 Information below is shown on the supplementary display when Bluetooth page 33.)
-
Page 41: References
For: – Latest firmware updates and latest compatible item list • Recordable/ReWritable discs that have not been finalized. – JVC original application • 8 cm CD. Attempting to insert using an adapter may cause malfunction. – Any other latest information Visit <https://www.jvc.net/cs/car/>. -
Page 42: Change The Display Information
References About AMAZON ALEXA Source name Display information: Main (Supplementary) • Alexa is a third party service, therefore the specifications are subject to change without prior CD or USB FRONT/ For CD-DA (applicable only for KW-R950BTS): notice. Accordingly, compatibility may be impaired or some or all of the services may become USB REAR/USB Track title (Artist) Track title (Artist) with Music Synchronization... -
Page 43: Troubleshooting
Troubleshooting Symptom Remedy Symptom Remedy Sound cannot be heard. • Adjust the volume to the optimum level. Elapsed playing time is not This depends on the recording process earlier (disc/USB). • Check the cords and connections. correct. “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of “NOT SUPPORT”... - Page 44 Troubleshooting Symptom Remedy Symptom Remedy “NO DISC” Insert a playable disc into the loading slot. “CODE ERROR” Make sure you have entered the correct pass code. (Page 15) “NO DEVICE” Connect a device (USB/iPod/iPhone), and change the source to USB/iPod USB again. “NO CONTENT”...
- Page 45 Contact (USA only) No response from Alexa Amazon cloud was unable to analyze the voice input. Call: 1-800-252-5722 ( or ) visit: <https://www.jvc.com> after the voice input. Wrong response from Alexa misunderstood what was said or did not catch Alexa.
-
Page 46: Installation/Connection
Installation/Connection Part list for installation This section is for the professional installer. For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer. (A) Wiring harness (×1) WARNING • The unit can only be used with a 12 V DC power supply, negative ground. •... - Page 47 Installation/Connection Installing the unit (in-dash mounting) Install onto the car brackets using the supplied screws (B) or (C). The screw holes differ depending on the model of the cars. Do the required wiring. (Page 42) Car bracket* Dashboard of your car * Only for illustration purpose.
- Page 48 Installation/Connection Wiring connection IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Antenna terminal Vehicle Fuse (10 A) dashboard Factory wiring harness (vehicle)
- Page 49 * Firmly connect the ground wire of the amplifier to the car’s chassis to avoid damaging the unit. For KW-X855BTS: MIC (Microphone input terminal) (page 17) Output terminals 2-way crossover 3-way crossover For KW-X850BTS: MIC (Microphone input terminal) (page 17) REAR: Rear output Tweeter output Output terminals (See “Connect external amplifiers via output terminals”.)
-
Page 50: Specifications
Specifications FM Frequency Range 87.9 MHz — 107.9 MHz (200 kHz step) USB Standard USB 1.1, USB 2.0 (High speed) 87.5 MHz — 108.0 MHz (50 kHz step) Compatible Devices Mass storage class Usable Sensitivity (S/N = 30 dB) 8.2 dBf (0.71 μV/75 Ω) File System FAT12/16/32 Quieting Sensitivity (DIN S/N = 46 dB) - Page 51 (7” × 3-15/16” × 6-1/8”) Maximum Output Power 50 W × 4 or KW-X855BTS/KW-X850BTS: 50 W × 2 + 50 W × 1 (Subwoofer = 4 Ω) 178 mm × 100 mm × 100 mm (7” × 3-15/16” × 3-15/16”) Full Bandwidth Power 22 W ×...
- Page 52 • Windows Media is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft. •...
- Page 53 INSTRUCCIONES en el siguiente sitio web: DIGITAL MEDIA RECEIVER RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE RECEPTOR DE MEDIOS DIGITALES <https://www.jvc.net/cs/car/> KW-X855BTS / KW-X850BTS Quick Start Guide Guide de démarrage rapide Guía de inicio rápido For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet.
- Page 54 útil, deberán ser reciclados en instalaciones que puedan dar el tratamiento Products: DIGITAL MEDIA RECEIVER adecuado a estos productos y a sus subproductos residuales correspondientes. Model Name: KW-X855BTS/KW-X850BTS Póngase en contacto con su administración local para obtener información sobre el Responsible Party: JVCKENWOOD USA CORPORATION punto de recogida más cercano.
- Page 55 SOFTWARE LICENSE AGREEMENT ISED Caution This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is conditions: copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions 1.
- Page 56 Article 4 Right pertaining to the Licensed Software Article 9 Destruction of the Licensed Software Any and all copyrights and other rights pertaining to the Licensed Software and related documents If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or Software, any related documents and copies thereof within two (2) weeks from such date of termination.
- Page 57 Important Notice concerning the Software -CMP The MIT License (MIT) Copyright (c) 2014 Charles Gunyon -jansson Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated Copyright (c) 2009-2012 Petri Lehtinen <petri@digip.org> documentation files (the "Software"), to deal in the Software without restriction, including without Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the...
- Page 58 sha2 Copyright (c) 1995, 1996 Carnegie-Mellon University. All rights reserved. AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/ Author: Chris G. Demetriou Copyright (c) 2000-2001, Aaron D. Gifford Permission to use, copy, modify and distribute this software and its documentation is hereby granted, All rights reserved.
- Page 59 T-Kernel 2.0 This product uses the source code of T-Kernel 2.0 under T-License 2.0 granted by T-Engine Forum (www.tron.org) BSD-3-Clause Copyright (c) 2000-2001, Aaron D. Gifford All rights reserved. You may obtain a copy of the license at https://opensource.org/licenses/BSD-3-Clause THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
- Page 60 INSTALLATION/CONNECTION Basic procedure Remove the key from the ignition switch, then disconnect the terminal of the car battery. This section is for the professional installer. Connect the wires properly. See “Wiring connection” on page 3. For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer. Install the unit to your car.
- Page 61 Wiring connection Vehicle dashboard a Light blue/yellow: To the steering wheel remote control adapter Antenna terminal b Brown (not used) c Blue: To power antenna d Blue/white: To amplifier e Blue/white: Remote (12 V 350 mA) Fuse (10 A) f Orange/white: Illumination Factory wiring g Yellow: Battery 12 V harness (vehicle)
- Page 62 BEFORE USE BASICS (on faceplate) IMPORTANT KW-X855BTS/KW-X850BTS • To ensure proper use, please read through this Guide before using this product. It is especially important that you read and observe Warnings and Cautions in this Guide. • Please keep the Guide in a safe and accessible place for future...
- Page 63 GETTING STARTED Set the basic settings Press and hold MENU. Acknowledge the crossover type and cancel the Turn the volume knob to select an item (see the following table), then demonstration press the knob. Repeat step 2 until the desired item is selected or activated. When you turn on the power for the first time (or [FACTORY RESET] is set to Press MENU to exit.
- Page 64 Press SOURCE B repeatedly to select FM or AM. • KW-X855BTS: USB FRONT/USB REAR/iPod FRONT/iPod REAR or iPod BT Press S / T to search for a station automatically. • KW-X850BTS: USB/iPod USB or iPod BT (or) Press and hold S / T until “M” flashes, then press repeatedly to Start playback search for a station manually.
- Page 65 • Refer to the INSTRUCTION MANUAL on the following website for the detailed explanation of each item: <https://www.jvc.net/cs/car/> • The availability of each item vary depending on the model. Turn the volume knob clockwise to select [SUBWOOFER SET], then press Menu items the knob.
- Page 66 Turn the volume knob clockwise to select [COLOR], then press the knob. sources, refer to the INSTRUCTION MANUAL on the following website: <https://www.jvc.net/cs/car/> • The availability of each source vary depending on the model. Press the volume knob if [PRESET] is shown on the display.
- Page 67 Select group or folder Press 1 J / 2 K. Search and select the name of your receiver (“KW-R950BTS”/ “KW-X855BTS”/“KW-X850BTS”) on the Bluetooth device. Press S / T. Reverse skip/Forward skip Perform (A) or (B) depending on what appears on the display.
- Page 68 • Windows Media is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft. •...