JVC KW-M450BT Instruction Manual page 39

Settings Settings
4
Touch [Learning completed] to finish the
procedure.
To change the previously assigned function:
1 Touch the key to change on the <Steering
Remote Controller Setting> screen.
2 Select a new function to assign from the pop-up
list.
3 Touch [Change completed] to finish the
procedure.
To initialize the setting:
Touch [Learning initialization].
• A confirmation message appears. Touch [Yes].
– To cancel the initialization, touch [No].
Note:
• Touching [ ] key without touching [Learning
completed] or [Change completed] will not assign
the functions selected in the previous steps.
• Be sure to touch [Learning completed] or [Change
completed] to assign the functions.
<Beep>*
• ON (Initial): Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
* Available only when <X'over Network> is set to [2way].
(Page 30)
<Language select>
Select the text language used for on-screen
information. For details, see "Initial settings" on
page 4.
<Touch Panel Adjust>
Adjust the touch positions of the keys on the screen.
Touch and hold the center of the marks at the lower
left (1), then the upper right (2) as instructed.
(Hold)
• To reset the touch position, touch [Reset].
• To cancel the current operation, touch [Cancel].
<Clock>
Select the method to set the date and clock. For
details, see "Calendar/clock settings" on page 5.
<Time Zone>*
Select the time zone for your area. For details, see
"Calendar/clock settings" on page 5.
* Selectable when [Clock] is set to [Manual]. (Page 5)
<Clock Adjust>*
Adjust the date and clock manually. For details, see
"Calendar/clock settings" on page 5.
* Selectable when [Clock] is set to [Manual]. (Page 5)
<DISP Key>
Select the screen displayed when [
pop-up short-cut menu is touched, when DISP button
(Hold)
on the remote control is pressed, or when DISP button
on the steering wheel remote controller is pressed.
• Apps: Displays the Mirroring for JVC application
screen from the connected smartphone.
• NAV *: Switches to the navigation screen from the
connected navigation unit.
– Navigation screen cannot be displayed if
<Navigation Input> is set to [OFF]. (Page 40)
• OFF (Initial): Displays the current source control
screen.
* Not available for KW-M450BT Australia and New Zealand models/
KW-M450BT Indonesian models.
] on the
ENGLISH 37