Settings; Audio Settings - JVC KW-M450BT Instruction Manual

Bluetooth® Bluetooth®
<Bluetooth HF/Audio>*
Select the speakers used for Bluetooth mobile
phones.
• Front: Front speakers only.
• All (Initial): All speakers.
<Auto Response>
• 1 – 30 (in 5 second steps): The unit answers the
incoming calls automatically. Set the calling ring
time (seconds).
When there is another incoming call, the unit will
also answers the call in the selected time. The
previous call will be put on hold.
• OFF (Initial): The unit does not answer the calls
automatically. Answer the calls manually.
<Auto Pairing>
• ON (Initial): Establishes pairing automatically with
the iOS device (such as iPhone) connected via
USB input terminal. (Auto pairing may not work
for some devices depending on the iOS version.)
• OFF: Cancels.
<Sort Order>
Select a first name or last name to use when sorting
the list in alphabetical order.
• First: Sorts the list in the order of first name.
• Last (Initial): Sorts the list in the order of last
name.
* Selectable only when <X'over Network> is set to [2way].
(Page 30)
30 ENGLISH

Settings

Settings

Audio settings

1
Display the <Audio> screen.
On the Home screen, touch as follows:
2
Select a setting to change.
E.g. Audio settings screen
You cannot change the <Audio> screen in the
following situations:
• When the AV source is turned off.
• When the Bluetooth phone is used (making or
receiving a call, during a call, or while voice dialing).
• During navigation guidance*
* Except for KW-M450BT Australia and New Zealand models/
KW-M450BT Indonesian models.
<Speaker/X'over>
Preparation:
Before making the adjustment for <Speaker/X'over>,
select the appropriate crossover network mode
according to the speaker system (2-way speaker
system or 3-way speaker system).
1
Turn off the AV source.
On the Home screen, touch as follows:
Then, on the source/option selection screen, touch
[AV Off].
2
Display the <X'over Network> screen.
On the monitor panel, press the following buttons
at the same time:
3
Select the crossover network mode.
[2way] Select this when 2-way speaker
system is used (front/rear).
[3way] Select this when 3-way speaker
system is used (tweeter/mid range/
woofer).
A confirmation message appears. Touch [Yes].