JVC KW-M450BT Instruction Manual page 34

Settings Settings
Store your own sound adjustments
1
Select a preset sound mode.
2
Select a band ( 1 ) and adjust the level (
3
then adjust the sound ( ).
Adjust the sound as follows:
<Bass EXT>
Activates/deactivates bass.
• ON/OFF (Initial)
<SW Level>
Adjusts the subwoofer level.*
• –50 to 10 (Initial: 0)
* Not adjustable when <None> is selected for subwoofer on
the <Speaker Select> screen. (Page 30)
3
Repeat step 2 to adjust the level of other
bands.
4
Touch [Memory] to store adjustment.
A user selection window appears. Select from
[User1] to [User4] to store your adjustment, then
touch [Close] to close the window.
32 ENGLISH
• To apply the adjusted equalizer to all playback
sources, touch [ALL SRC], then touch [OK] to
confirm.
• To clear the adjustment, touch [Initialise].
2 ),
<Position/DTA>
You can adjust the sound effects according to your
listening position. You can also localize the sound
image in front of the selected seat.
Setting the listening position
Touch [Listening Position] (
the listening position ([Front L], [Front R],
[Front All]*, or [All]) ( 2
* [Front All] is selectable only when <X'over Network> is set to
[2way]. (Page 30)
Make fine adjustments to the delay time of the speaker
output to create a more suitable environment for your
car.
• Speaker types shown on the screen differ depending
on the <X'over Network> setting. (Page 30)
1
2
1 ), then select
).
Adjusting the Digital Time Alignment (DTA)
Touch [Adjust] on the <Position/DTA>
screen to display the DTA adjustment
screen.
Touch [Delay] ( 1 ), then adjust the Digital
Time Alignment (DTA) value (
speaker.
E.g. When <X'over Network> is set to [2way]
• To determine the adjustment value, see
"Determining the value for <Position/DTA>
adjustment" on page 34.
2 ) for each