JVC KW-M450BT Instruction Manual page 19

Tuner Tuner
[PTY]*1*2 (For FM Radio Data System features)
Enters PTY search mode.
1 Touch a PTY code.
2 Touch [Search] to start searching.
If there is a station broadcasting a
program of the same PTY code as you
have selected, that station is tuned in.
• You can set the language displayed
for the PTY Search on the <TUNER
SET-UP> screen. (Page 17)
7
[ ]
Attenuates the sound.
• To restore the sound, touch the key
again, or adjust the volume.
S T
[ ]/[ ] Searches for a station.
• The search method differs depending
on the selected seek mode.
(Page 16)
[SSM]*1 Presets stations automatically.
[ ]
Displays the <TUNER SET-UP> screen.
(Page 17)
*1 Available only when FM is selected.
*2 Only English/Spanish/French/German/Dutch/Portuguese are
available for the text language here. If another language has
been selected in <Language Select> (Page 37), the text
language is set to English.
Presetting stations in the memory
You can preset 18 stations for FM and 6 stations for
AM.
Automatic presetting — SSM (Strong-
station Sequential Memory) (for FM only)
On the source control screen, touch as follows:
A confirmation message appears. Touch [Yes].
The local stations with the strong signals are found and
stored automatically.
Manual presetting
1
Select the band, then tune in to a station
you want to store.
• See "Playback information on the source control
screen" on page 16 for details.
2
Select a preset number to store into.
The station selected in step 1 is stored into the
preset number you have selected.
Selecting a preset station
Select the band (
station ( 2 ).
Settings for tuner reception
1
Display the <TUNER SET
On the source control screen, touch as follows:
2
Make the settings.
(Hold)
1 ), then select a preset
UP> screen.
-
ENGLISH 17